Load the roller cover with paintAug 30, 2016
Most of you have probably used paint rollers before, with varying degrees of success. Maybe you just plunged right in and started rolling, developing your own technique as you went. Or maybe you read the instructions telling you to apply the paint in some pattern, usually a “W,” before rolling it out. We're going to show you a slightly different approach.
I work in a paint roller cover manufacturer for many years. In this article, I will teach you a simple method to quickly spread a smooth, even coat of latex paint on the wall. It's not fancy, but it gets the job done in record time and eliminates common problems like light areas, roller marks and built-up ridges that sometimes plague first-time painters.
However, even the best technique won't work with poor-quality equipment. Don't waste your money on those all-in-one throwaway roller setups when you can buy a pro setup that will last a lifetime for under $20. Start with a good roller frame. To extend your reach and give you better control, screw a 48-in. wood handle ($3) onto the end of the roller. You could also use a threaded broom handle. You'll need a container for the paint. While most homeowners use paint trays, you'll rarely see a pro using one. That's because a 5-gallon bucket with a special bucket screen hung over the edge works a lot better.
Here are a few of the advantages of a bucket and screen over a roller pan:
It's easy to move the bucket without spilling
The bucket holds more paint. You won't have to frequently refill a pan.
You're less likely to trip over or step in a bucket of paint.
It's quicker and easier to load the roller cover with paint from a bucket.
It's easy to cover a bucket with a damp cloth to prevent the paint from drying out while you're taking a lunch break.
Learn more in the website: www.cohwabrush.com.