Zhenjiang Cohwabrush Manufacture Co., Ltd.

3 Tip about Roll Paint onto a Wall

Jun. 01, 2016

We all know that we use paint roll onto a wall, but how to roll paint onto a wall? Do you know the details about roll painting? Let me tell you.


paint roller


TIP 1: Remove lint from a new roller cover with painter's tape or a vacuum, and roll it into the paint tray until it's half coated. Roll the cover up onto the grooves, then back into the paint. Do this a couple of times until the entire cover is saturated but not overloaded; that way, it won’t spatter or cause drips.

TIP 2: Roll the wall in a W or N pattern to coat the surface in wide sections. Work along a wet edge that's been cut in, and get as close to the trim as possible to avoid leaving a ribbon of brush marks around the edges of the wall.

TIP 3: Use moderate pressure on the roller. Too much pressure causes a bead, or “rope,” along the edge, while too little pressure can make your arm tired. At the end of each stroke, lightly lift the roller away from the wall to avoid creating a distinct edge


    Skype: luckyin1
    Fax: +86(0) 511 8332 0358
    Tel: +86(0) 511 8332 5828
    Address: Zhuangquan, Guyang Town, Dantu Distric, Zhenjiang City, Jiangsu Province, China
Download a PDF of our latest catalogue or
Contact Us to send your any request.
Copyright © Zhenjiang Cohwabrush Manufacture Co., Ltd. All Rights Reserved
Sitemap|Technical Support:
chat now