When using the roller brush, do you remember it?

When people use the roller brush, they sometimes find that this or that problem has arisen, which raises questions about the quality of the product. In fact, as long as the ‍‍‍‍‍‍roller brush manufacturer‍‍‍‍‍‍ pay attention to the following points, then the brush can be well eliminated. Roller product may have problems.

1. Firstly, the roller brush must be cleaned and packaged before leaving the factory. Because it will produce a lot of broken hair in the process of planting hair and peace, it is necessary to comb the brush filament before packaging, and to clean up the broken hair. clean.

2. Be careful not to expose the brush wire (without any packaging) to the ground or other contaminated environment before reaching the use factory.

3. During the transportation from the manufacturer to the agent, in order to prevent impurities and dust from diffusing into the filaments, packaging materials such as packing boxes and packaging bags should be used to prevent damage to the roller brush.

4. Put a pad on the shaft of the quality roller brush to keep the brush upright and clean.